REVIEW ARTICLE
Heavy Metals in Sewage Treated Effluents: Pollution and Microbial Bioremediation from Arid Regions
Salma K. Al-Musharafi
Article Information
Identifiers and Pagination:
Year: 2016Volume: 10
Issue: Suppl-2, M8
First Page: 352
Last Page: 362
Publisher ID: TOBIOTJ-10-352
DOI: 10.2174/1874070701610010352
Article History:
Received Date: 26/03/2016Revision Received Date: 05/05/2016
Acceptance Date: 15/06/2016
Electronic publication date: 11/11/2016
Collection year: 2016
open-access license: This is an open access article licensed under the terms of the Creative Commons Attribution-Non-Commercial 4.0 International Public License (CC BY-NC 4.0) (https://creativecommons.org/licenses/by-nc/4.0/legalcode), which permits unrestricted, non-commercial use, distribution and reproduction in any medium, provided the work is properly cited.
Abstract
Not all heavy metals are toxic. Some at lower concentrations are essential to the physiological status of the organism. Under certain conditions, induced toxicity occurs when the heavy metals are in the form of cations which tends to bind to certain biomolecules, thus becoming toxic to organisms. In many industries, toxic heavy metals such as As, Cd, Cr, Cu, Hg, Pb and Zn, are released mainly in sewage effluents causing major environmental pollution. Several of the heavy metal contaminations resulted from industrial wastes, along with the mining and burning of fossil fuels, leading to water and soil contamination which causes serious health problems. Rapid population growth plus a steady increase in agriculture and industry are the main cause of environmental pollution. The most common sources of heavy metals are fuel combustion, mining, metallurgical industries, corrosion and waste disposal which infiltrates the soil and underground water. When present at certain levels in the human, metals can cause certain diseases. Most of conventional technologies are inefficient to remove heavy metal contaminants. Microbial bioremediation is a potential method for the removal of heavy metal pollution in sewage effluents before being discharged into the environment. However, further research is needed for isolation and identification of microbes resistant to heavy metals. Industrial regulatory standards must be established to regulate the spread of non-essential metals in the environment. The regulations must be rigidly enforced. The rest of the essential metals must also be regulated since an increase over the physiological limit can also be harmful.
