REVIEW ARTICLE
The Effect of Iron on Gluconic Acid Production by Aureobasidium pullulans
Savas Anastassiadis1, *, Svetlana V. Kamzolova2, Igor G. Morgunov2, Hans-Jürgen Rehm3
Article Information
Identifiers and Pagination:
Year: 2008Volume: 2
First Page: 195
Last Page: 201
Publisher ID: TOBIOTJ-2-195
DOI: 10.2174/1874070700802010195
Article History:
Received Date: 07/08/2007Revision Received Date: 07/05/2008
Acceptance Date: 07/05/2008
Electronic publication date: 23/7/2008
Collection year: 2008
open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: (https://creativecommons.org/licenses/by/4.0/legalcode). This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Abstract
New processes have been previously described for the continuous and discontinuous production of gluconic acid by Aureobasidium pullulans (de bary) Arnaud. Little is known about the regulatory mechanisms of gluconic acid production by A. pullulans. The response of growth and gluconic acid metabolism to a variable profile of iron concentrations was studied with A. pullulans in batch and chemostat cultures. A surprisingly high optimum N-dependent iron ion concentration in the feed medium, in the range between 0.5 mM and 3.0 mM Fe (optimum 1-2 mM), was found to be particular requirement for economically profitable continuous production of gluconic acid with 3 g/l NH4Cl. Increased iron concentration promoted growth on defined glucose medium. 223.3 g/l gluconic acid were continuously produced at a formation rate of the generic product (Rj) of 16.8 g/(l*h) and a specific gluconic acid productivity (mp) of 2.5 g/(g*h) at 13 h residence time (RT) with 1mM iron, compared with 182 g/l reached at 0.1 mM. The product selectivity (product yield based on glucose) increased continuously by raising iron concentration following a saturation curve, reaching a maximum of about 98% (mol/mol) at 2 mM Fe and 76.2% conversion, compared with only 84.3% determined at 0.1 mM. The process is not obligatory growth limiting or growth related and residual nitrogen was found in all of continuous experiments, e.g. 197 mg/l of nitrogen at 0.1 mM and 201 mg/l at 2 mM of iron.