RESEARCH ARTICLE

Bond Strength of Repaired Acrylic Denture Teeth Using Visible Light Cure Composite Resin

Saja Ali Muhsin, * Open Modal Authors Info & Affiliations
The Open Dentistry Journal 31 Jan 2017 RESEARCH ARTICLE DOI: 10.2174/1874210601711010057

Abstract

Background:

Although bonding to denture teeth after surface treatment with chemical agents is desirable, there is little information on the use of Visible Light Cure composite resin (VLC) as bonding denture materials.

Objectives:

To determine the effect of various surface treatments on shear bond strength between Visible Light Cure composite resin and the acrylic denture teeth interface.

Methods:

Forty cylindrical sticks of acrylic resin with denture teeth mounted atop were prepared. Various treatments were implemented upon the acrylic resin teeth surfaces. The samples were divided into four groups (n = 10). Light-cured composite resin (LC) was applied over all treated and untreated surfaces of tested groups. The shear bond was tested using a universal tensile testing apparatus with the knife-edge of a 0.8mm shear tester. Data were statistically analyzed using one-way ANOVA performed at a confidence level of 95% and significant P-value of (P ≤ 0.05).

Results:

Analysis of variance (ANOVA) showed statistically significant difference (P < 0.05) between treated and untreated teeth surfaces. The treated surfaces exhibited various levels of bond strength depending on the type of treatment.

Conclusion:

Application of VLC bonding agent with prior treatment of methylmethacrylate (MMA) on the acrylic resin denture teeth resulted in maximum bond strength with composite resin.

Keywords: Light-cure composite, Methylmethacrylate, Repaired denture teeth, Shear-bond strength, Surface treatment, Visible Light Cure bonding agent.
Fulltext HTML PDF ePub
1800
1801
1802
1803
1804