A Study on the Design of an Outer Rotor and Spoke Type PMSM for Improving Power Density
Hak Jung Kim, Sooyoung Cho, Gang Seok Lee, Hyung-Kwan Jang, Ye Jun Oh, Ju Lee*
Department of Electrical Engineering, Hanyang University, Seoul, South Korea
Abstract
Object:
This paper proposes an outer rotor and spoke-type permanent magnet synchronous motor (outer rotor spoke-type PMSM) to increase the power density compared to the inner rotor spoke-type permanent magnet synchronous motor(inner rotor spoke-type PMSM) used in washing machines.
Method:
In order to investigate the output characteristics of the Outer Rotor Spoke-type PMSM, comparison and analysis were conducted on three models of 16-poles/9-slots, 20-pole/9-slots and 22-poles/9-slots. Compare models were conducted with the limited condition which applies the same current density, phase voltage limit, and stator. The final model was optimized based on the model with the best output characteristics among three compare models.
Conclusion:
Finally, output characteristics are compared between compare models and the final model.
Keywords: Washing Machine, Direct Drive Motor (DD Motor), Spoke-type PMSM, Torque transmission, Electric motors.
Article Information
Article History:
Received Date: 4/5/2018
Revision Received Date: 19/7/2018
Acceptance Date: 20/7/2018
Electronic publication date: 31/08/2018
Collection year: 2018
© 2018 Kim et al.
open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at:
https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
* Address correspondence to this author at the Department of Electrical Engineering, Hanyang University, P.O. Box: 04763, Seoul, South Korea; Tel: +81-2-2220-0342; E-mails: julee@hanyang.ac.kr
Open Peer Review Details |
Manuscript submitted on 4-5-2018 |
Original Manuscript |
A Study on the Design of an Outer Rotor and Spoke Type PMSM for Improving Power Density |