| Parameters | Examples | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| Transmitted power (kW) | 72.06 | 48.5 | 3 | 3.75 |
| Pinion speed (rpm) | 406 | 3450 | 1800 | 2500 |
| Pinion torque (Nm) | 1694.8 | 134.24 | 15.92 | 14.32 |
| Speed ratio | 1.0 | 3.136 | 3.0 | 1.60 |
| Normal pressure angle (o) | 20 | 20 | 20 | 20 |
| Helix angle (o) | 0 | 15 | 30 | 41.41 |
| Normal module (mm) | 6.35 | 2.12 | 2.54 | 2.54 |
| Pinion teeth number | 20 | 24 | 17 | 15 |
| Gear teeth number | 20 | 75 | 51 | 24 |
| Pinion pitch diameter (mm) | 127 | 53.92 | 49.86 | 50.8 |
| Gear pitch diameter (mm) | 127 | 168.49 | 149.58 | 81.28 |
| Face width (mm) | 25.4 | 24.13 | 57.15 | 38.1 |
| Service load factor | 1.610 | 1.853 | 2.495 | 1.663 |